Glider
Is there a glide that will fit the standard wand that comes with the prochem blazer?
View ArticleThe computer doesn't work again, Everest 49 hp old model, discontinued.
Every 4 years I need to replace it, it's the Efi zeems, A15, for the Prochem Everest 49 hp the old one that is discontinued, what can I do, Are my technicians doing something wrong when they operate de...
View ArticleNo h2o pressure
After winterizing my prochem legand I reclaimed the antifreeze (according to the book) and flushed until clear. On the job I noticed that I have very little pressure. I made sure the bypass valve was...
View ArticleHeat exchanger leaking
My heat exchanger on my Prochem Performer 405 has developed a steady leak probably from freezing. I've pulled it and there is a small crack by the weld on the coil. Before I removed it I could clean...
View ArticleLost pressure
I have a Prochem Saber 2000 that I bought 9 months ago. A few nights ago I was cleaning a slate floor and got halfway through the job and lost pressure. When I go to engage the heat exchanger I do hear...
View ArticlePeak GTX- t-406 Gardner Denver blower trouble
Just recently bought this machine. Blower is starting to act strange. The vacuum was releasing way to early and often .I took it to Bridgepoint and they said they fixed it, but now it goes all the way...
View ArticleProchem everest overheating
Everest keeps overheating. Have flush radiator etc only thing I can think off Is the thermostat is stuck shut. Can pull the thermostat out and run without it no problem? Would hate to pull it out and...
View ArticleLegend truckmounts New vs Old
I have had two Prochem Legend truck mounts one from 1999 and a new one from 2014. I am starting to realize that the old one seamed to last longer with less issues. Has anyone else noticed this? My new...
View ArticleClik here to view.
ProChem Legend Heat Exchanger
I have a ProChem Legend and I am in need of a Heat Exchanger. I have looked around and the cheapest I have found is about $1350 any ideas? Thanks for you help by the way holy crap is that pricey!!
View ArticleInstalling a Prochem Legend?? Help, Suggestions?
I just picked up an older Legend, mounted on a fresh water tank, and I'm looking for any help or suggestions from anyone familiar. I did the install on my Panther, and this is similar, but bigger and...
View ArticleProchem Legend Gt / Oil Leak Very Bad
I have a Prochem Legend Gt bought in 2011 , the unit is 4 years old and has 2300 hours on it. I change the oil & filter every 100 hours like clock work. The machine has always run great. There has...
View ArticleNew Engine For My Truckmount?
I need you guys opinion on an engine that I have, I noticed a few months back oil was on my unit under the burner (Prochem 150). So finally took it to my regular mechanic, different mechanic could not...
View Articleauto pump-out problem
i have the in tank pumpout (the one in the blue box with screen on one side). it does not pump very well at all. if i have the machine idleing and no hoses on it pumps good but when i crank it up with...
View ArticleSuction
Please help! ! I prochem Saber 2000 model and can't get continuous suction. Hold hand over vacuum inlet and it builds up but drops when put vac hose to it.
View ArticleProchem Legend Temperature
I've been using this prochem legend se about a year now and when they replaced the heat exchanger, it went from 250F to 230F maximum heat temperature. I called the tech. who replaced my heat exchanger...
View ArticleClik here to view.
Prochem Legend Float Switch Troubleshooting? How To?
I finally got to run my Legend for 3 hours last night, and it really impressed me! But when I went out to the truck, it had blown water everywhere, because the float switch didn't shut it down. How to...
View ArticleProchem Performer Cub XL won't start
Please watch the video. Any suggestions I could try on my own until I take it to the shop. View attachment 60666
View ArticleProchem performer 405
Hey guys i have a question maybe someone can help us with. So our truckmount as soon as we turn the pump switch on watet is dripping out the exaust on the right side of the machine......we recently had...
View ArticlePROCHEMS-All models REPAIR archive---
65 75 75HE 100 100A 150 200 300 400 650HP 800A Bruin 1 Bruin 2 Cub Cub XL Bear Bear Cat Blazer Blazer XL Trail Blazer Legend Legend SE Legend XL Performer Performer 405 Performer 805 Peak Apex Everest...
View ArticleCub XL low pressure
Just bought a used Cub XL and after I got it running found that it has some water pressure but not a lot, maybe 150 lbs. The pressure gauge doesn't work so I can't tell. And the pressure can't be...
View Article